If your Orbi router is experiencing connectivity issues, slow internet, or login problems, performing a reset operation might be the remedy that restores it to factory defaults. This guide outlines reset Orbi Router, when it is necessary, and what the Orbi setup will look like after the reset.

Reasons for Resetting Your Orbi Router

Resetting the router can improve the following network and performance-related issues:

  • Orbi login credentials have been mistakenly forgotten.
  • The signal quality is poor, or there are frequent drops.
  • Cannot access Orbilogin.com or the Orbi app.
  • Firmware or configuration issues.
  • The user is ready for a new Orbi installation.

Resetting Orbi should be the last option among your troubleshooting methods after you have restarted the router and checked the internet connection. It is a last resort method that will delete all the customized settings of your router.

Resetting Methods for Orbi Router

There are two ways to perform a reset:

  • Soft Reset (Reboot) – This will simply turn off the router momentarily and turn it on again without changing any settings.
  • Factory Reset – All configurations will be cleared, and the router will be set to default.

Factory reset is a very effective method of resolving problems completely.

Step by Step Process of Resetting Orbi Router Completely

Step 1: Make Your Orbi Router On

Plug your Orbi router in and turn on the power. The LED should be white or blue and solid, wait for that.

Step 2: Locate the Reset Button

You will typically find the reset button to be a small pinhole at the rear of your Orbi router.

Step 3: Press and Keep Holding the Reset Button

With a paper clip or pin, press and keep holding the reset button for about 10–15 seconds until you see the power LED turning amber or red repeatedly. It is a signal that the resetting period has started.

Step 4: Wait for Reboot

Automatic restart will take place as soon as the button is let go. The entire thing will probably take a couple of minutes. When the LED turns solid white, it means your router has been completely reset.

Step 5: Reconfigure Your Orbi Router

The router is back to its factory default settings, and the Orbi setup is up again...

  • Connect your device to the original Wi-Fi network name (SSID), which is written on the router sticker.
  • Open a web browser and go to Orbilogin.com or use the Orbi app, alternatively.
  • Enter default login credentials (which are usually admin/password).
  • Follow the on-screen prompts to finish the Orbi setup, including modem connection.

Post-Reset Tips

  • Run your Orbi firmware upgrade for better performance.
  • Changing your Orbi login password is a wise precautionary move to increase your security.
  • The new Wi-Fi network will require all devices to be reconnected.
  • Nevertheless, you may retain your new network credentials annotated for instant access later.

Conclusion

The resetting of the Orbi router would eliminate major connectivity and performance issues once. In short, if it is a matter of troubleshooting or first-time setting up clean Orbi, it means stretched Wi-Fi area and smooth user experience. Besides, it is yellow lights on the router mean you take a look at updating your firmware and securing your network for consistent good performance.