A Netgear Extender setup can be an ideal solution if your wireless connection is weak in some areas of your house or workplace. By taking the proper steps, you can almost instantly extend the range of your network.
- Power up your Netgear Extender
The first thing to do is to plug your Netgear WiFi extender into a wall socket near the WiFi router. Wait till the Power LED lights up in solid green color.
- Connect to the Extender
Go to the WiFi settings of your computer or mobile device and select the extender's default network name. Usually, it will be "NETGEAR_EXT" or something similar.
- Reach the Configuration Page
After connecting, open a web browser and then type mywifiext.net login into the address bar. Consequently, the Netgear Extender Setup page will appear.
If you cannot reach it, try the default IP address of the extender instead.
- Follow the prompts on the screen
You will be taken through the process by the setup wizard. Name your extended network, select your existing WiFi network, and type in its password.
- Place Your Extender in Position
After the extender is set up, it’s time to disconnect it and move it to the spot, which is about halfway between the router and the area with a poor signal. Make sure that the extender is still within the range of your router.
- Reconnect Your Devices
Finally, all the devices should be connected back to the extended network. To verify that the setup has better coverage, check the internet speed.
Tips:
- Your extender should be located far away from electrical interference and thick walls.
- If the site www mywifiext net is not accessible, try a different device or clear your browser's cache.
- If you need to, you can always go back to the Netgear Extender Setup page to set it up again.
By adhering to these steps, your entire place will have a larger and more reliable WiFi coverage.
Visit our website to learn more about it.